ALL

News

How to Choose the Right LED Parking Lot Lights

Choosing LED parking lot lights takes more than picking a wattage. Learn how pole height and layout affect your choice, when to use an arm mount or slip fitter, and how photocells and dimming fit your operating schedule. Explore light distribution, certifications, weather protection and warranty terms so you can compare fixtures with confidence before you buy.

On 1 comment

Parking Lot Lighting Requirements by Property Type

Key Takeaways Find your property's reference: ordinary open parking is 1.0 fc suburban / 1.5 fc urban, maintained average, in LDL's 2013 guide. Retail, hospital and school parking: Germantown's published references are 1–2 fc maintained average; multifamily and industrial employee parking are 0.5–1.0 fc. Separate vehicle displays: LDL's 2013 exterior-sales references are 15 fc suburban / 20 fc urban, not...

On 0 comments

Metal Halide to LED Parking Lot Conversion — ROI

Key Takeaways A 300W LED replaces a 1,000W metal halide parking lot fixture, cutting energy use ~70% (real draw drops from ~1,100W to ~300W per fixture) Wattage replacement guide: 150W LED → 400W MH · 200W LED → 600W MH · 300W LED → 1,000W MH · 400W LED → 1,200-1,500W MH A 20-fixture parking lot conversion typically saves $8,000-$10,000...

On 0 comments

GGJIA Vs Hyperlite Vs Sunco Comparison

Three commercial LED brands compete for U.S. warehouse, factory, garage and parking lot lighting projects: GGJIA, Hyperlite (at hi-hyperlite.com), and Sunco (at sunco.com). Each wins different categories: Longest warranty: Sunco (7 years on most products, some series 10 years) Most consumer reviews: Hyperlite (1,021+ Trustpilot reviews, 4.6/5) Best warranty terms: GGJIA (from purchase date, full-replacement, no pro-rating) Free photometric design: GGJIA...

On 0 comments

Loading Dock Lighting Requirements: OSHA Standards and Best Practices

Key Takeaways OSHA 29 CFR 1910.176(c) requires loading dock areas be "kept in good repair" and 1910.22(a) mandates "sufficient" illumination, but does not specify a footcandle number IES RP-7 (Industrial Lighting) sets the de facto standard: 30 footcandles minimum for loading dock work areas, 50 fc inside trailers Dock arm lights (the articulating lights mounted at each dock door) are...

On 0 comments

LED Parking Lot Lighting: Photometric Layout for Code Compliance

Key Takeaways Parking lot lighting is governed primarily by IES RP-20 (specific) and referenced through IES RP-8 (roadway) in many municipal codes Footcandle minimums range from 0.5 fc (basic safety) to 5+ fc (high-activity retail) depending on facility type Uniformity ratio target: 4:1 maximum-to-minimum for basic safety; 3:1 for retail and high-traffic Pole height typically 20–30 ft, with fixture spacing...

On 0 comments

Complete Warehouse Lighting Design Guide: Footcandles, Spacing, Wattage

Key Takeaways Warehouse storage areas need 10 footcandles (fc); picking aisles need 20–30 fc; packing and inspection stations need 50 fc per IES RP-7 Fixture spacing should not exceed 1.2–1.5× the mounting height for UFO high bay fixtures Wattage planning: roughly 0.7–1.0W per sq ft for storage; 1.5–2.0W per sq ft for high-pick warehouses Total lumens needed = (area ×...

On 0 comments