Use construction string lights to place light at repeated points along a route or across an unfinished work area. Choose the run around your available power, support points and the work that needs to be seen.
Planning concept only. Confirm the selected model and project layout; the sketch does not set fixture count, spacing or coverage.
Mark the usable outlet, turns, mounting points and the last area that needs light. Check total cord length and lamp spacing separately.
Compare flat and round light formats, guard options and the selected model’s output. A longer string does not automatically give more light at every working position.
Match the plug, supply and permitted connected load. Use only the locations and connection arrangements listed for the exact model.
| Decision | What to compare | Why it matters |
|---|---|---|
| Power and run | 50W, 65W, 100W and 130W options; check the exact run length. | Choose both output and the distance you need to serve. |
| Plug configuration | Listed 2-prong and 3-prong versions. | Match the required grounding arrangement; a plug adapter does not change a product rating. |
| Protection and location | Guard options and the model’s stated location rating. | IP65-rated flat and round string lights. Match the connection arrangement and installation to the site. |
Send the route length, supply voltage, support arrangement and site photos. Include whether you need guards and how many runs you are planning.
Learn how to identify the applicable work area and check light at the working surface.
Read the guide →Compare individual hanging fixtures when a work zone needs a different placement than a repeated string run.
Explore the collection →Review string-light selection background for a work route.
Read the guide →Review location suitability before choosing lights for outdoor work.
Read the guide →Excludes Alaska and Hawaii. Confirm delivery timing for your project.
Shipping informationKeep the original packaging and contact support before returning an order.
Return conditionsQuestions about your selection? sales@ggjia-led.com
Measure the full route from the power point to the last area needing light, including turns and connection access. Then compare lamp spacing, output and support positions on the exact string. Choose wattage and length together: a run can reach the end of a route yet still leave shadows at the task. For a large floor, prepare a simple layout instead of choosing only from total square footage.
Use the exact model’s maximum connected quantity or load, then check the power source and the rest of the connected equipment. If the manufacturer specifies both a maximum count and a maximum load, stay within both. Do not transfer a limit between 50W, 65W, 100W and 130W strings or between plug versions. Send the product link and planned quantity if you need the matching specification before ordering.
These string-light models are IP65-rated; choose the complete installation for the intended location and follow the matching instructions. The current flat and round construction string-light models are listed as IP65 in their matching specifications. Check the complete setup, including connectors and power access, before choosing lights for a weather-exposed route. A general “weather resistant” description is not enough to select the installation.
Choose a string when repeated light points along a route suit the job and the cord can be supported as instructed. Compare individual hanging work lights when you need to place fixtures separately around a work area, obstructions or changing tasks. Plan both around usable power and proper supports. Their wattages alone do not tell you whether the resulting light will reach the places where people work.
Thanks for subscribing!
This email has been registered!
| Product | SKU | Description | Collection | Availability | Product type | Other details |
|---|
