LED Jobsite Lighting


Choose corded LED jobsite lighting for construction, renovation and maintenance. Compare IP65 string lights for routes, hanging work lights for overhead work areas, and 80W/10,000lm or 200W/23,000lm dual-head tripods for movable tasks. Fixed loading-dock fixtures serve a separate bay installation.

Choose the Setup That Follows the Job

Use repeated light points along a route, overhead light where work stays in one area, and a tripod where the task changes location. This choice determines the support, floor space and power route before you compare output.

jobsite selection concept Support points and the work routeTripodHangingString-light run
Setup comparison: string, hanging and tripod fixtures solve different placement problems.

Match the Setup to the Work

  1. Long routes

    Use complete string-light runs along circulation routes or successive work areas. Plan the supports and run length.

  2. One overhead work area

    Use a hanging work-light model where an overhead support keeps equipment off the floor.

  3. A task that moves

    Use a dual-head tripod when you need to move and re-aim the light. Allow room for the stand outside the working route.

Choose by Jobsite Setup

Decision Available choices How to choose
A route with repeated light points 65W / 50 ft flat string or specified 100W or 130W / 100 ft strings Choose the set length and plug type for the route. The 100W 3-prong and 130W flat versions have different connection styles and chain limits.
Overhead work area Hanging Linkable Work Light: 60W, 100W or 150W Choose up to 10 × 60W, 7 × 100W or 5 × 150W per chain on that listing. The 250W model is a separate light.
A task that moves 80W / 10,000 lm or 200W / 23,000 lm dual-head tripod Choose a tripod when the light must move with the work. The 200W version adds 13,000 rated lumens per stand.

Choose Your Jobsite Lighting Setup

Send the work-area layout, route lengths, available support points and 120V supply locations. Tell us whether the light stays overhead or moves between tasks.

Related Resources

Shipping, Warranty & Returns

U.S. shipping

Free delivery to eligible U.S. destinations. Check shipping details for your address.

View shipping information

Warranty coverage

Review the selected product’s warranty coverage and claim requirements.

View warranty terms

Returns

Review return conditions before sending an item back.

View return information

Questions about your selection? sales@ggjia-led.com

Recently Viewed Products

Frequently asked questions

  • Does OSHA require specific brand lighting on jobsites?

    No. OSHA 29 CFR 1926.56 specifies illumination levels (footcandles), not specific products or brands. Any fixture that delivers required footcandles when properly deployed satisfies OSHA. The fixture must also comply with NEC electrical safety requirements (UL or ETL listing, GFCI compatibility) for installation on the jobsite.

  • What's the difference between temporary work lights, tripod lights and string lights?

    Temporary work lights hang from overhead structure (joists, scaffolding) via integrated hooks. Plug-and-cord installation. Daisy-chain capable. Tripod stand lights mount on portable adjustable-height tripods that stand on the floor or ground. Easy to relocate and re-aim. Construction string lights are linkable LED nodes spaced 8–10 ft along a cord, designed to span long distances like corridors, hallways and perimeter walks. A typical mid-size jobsite uses all three: temp lights for room-by-room coverage, tripods for active work zones and elevated work, string lights for travel corridors and stairwells.

  • Are GGJIA jobsite fixtures GFCI-compatible?

    Yes. All GGJIA temporary work lights, tripod lights and string lights are designed to work with standard GFCI outlets without nuisance tripping when properly grounded via the 3-prong plug. Cumulative load on a GFCI-protected circuit should stay below 1,440W (80% of 1,800W) to maintain stable operation.

  • Can I leave jobsite lighting connected overnight?

    Generally yes — LED fixtures consume minimal standby power and don't pose fire risk like halogen lighting did. The risk is unmanned operation: if a cord fails or fixture impacts overnight, no one is there to identify it. Best practice for unattended sites is to install motion-sensor outlets so lighting only operates when activity is detected.

  • How long do LED jobsite lights last?

    Rated L70 50,000 hours — the LED chips retain at least 70% of initial output at 50,000 hours of operation. For a contractor running a jobsite light 10 hours/day, 200 days/year = 2,000 hours/year, that's 25 years of usable LED life. The mechanical components (cord, hook, lens) typically wear faster than the LED itself due to repeated relocation and impact.

  • Can I get tripod or floor-stand brackets for my temporary work lights?

    Yes. GGJIA offers tripod brackets and floor-stand brackets as accessories that fit the standard temporary work light head. The same light head can be hung overhead, floor-mounted or tripod-mounted depending on the bracket. See Lighting Accessories →.

  • Are these fixtures rated for outdoor jobsite use?

    All GGJIA jobsite fixtures are IP65 rated for sheltered outdoor or covered conditions (rain, dust). For long-term outdoor installation in direct rain, install dedicated outdoor-rated fixtures (wall packs, flood lights, parking lot lights). For short-term outdoor jobsite use in occasional weather, IP65 is sufficient.

  • Do GGJIA jobsite fixtures meet Canadian electrical code?

    GGJIA temporary work lights and string lights are ETL Listed (cETL for Canadian compliance). For Canadian jobsites under the Canadian Electrical Code (CEC), confirm fixture markings include "cETL" or "cUL". Most GGJIA jobsite fixtures carry both certifications.

  • How many hanging work lights can I link together?

    For the LED Construction Temporary Job Site Hanging Linkable Work Light, the confirmed maximum is 10 fixtures at 60W, 7 at 100W or 5 at 150W, including the first fixture. Choose the power version before planning the chain. The separate hanging-light families and multi-head string lights use their own limits.

  • Can the loading dock lights in this collection be moved like temporary lights?

    No. The dock-arm fixtures are mounted at a loading bay so the head can be aimed into a trailer. They belong to a fixed bay setup. Choose the hanging, string or tripod products when the requirement is lighting that is removed or moved as the work progresses.