Bought the 4 pack of 300watt lights. Installed them and 1 of the lights wasn't working completely. Contacted customer service and they immediately sent out a replacement light! For reference the garage is 40' deep 22' wide and 15' high. Great lighting. One light is not pictured but turned on...

I got this to add to my garage for some additional light when working on projects. This thing is super bright. I've got it mounted at about 9' high and it's almost too bright if you're directly underneath it. And be careful not to look directly at it. Overall, it's easy to hang and it works very well for my needs. When I get my shop build, I will be getting several more of these to light up the 1,000 sq ft nice and bright.

These are very bright yet compact LED high bay troffer-like fixtures. They are not as large as a 2x4 troffer fixture, yet they are very bright. They are well built and all metal construction. Pretty easy to install. they are meant to be hung from ceiling with included cables. I would not recommend mounting directly against a ceiling as the fixture would likely get too hot without proper spacing. Has UL listed sticker.

Basic in style shop light ceiling lamp.130W power, 19500LM brightness LED Lamp.Multiple strips of LED mini lights.Suspension cables included with Lamp fixture.This fixture does not plug in.Simple enough to install, but you need to hard wire it to an electrical ceiling box.This fixture is dimmable when connected to a dimmer switch.Hire an Electrician if you don't know how to install properly.Good value Lamp for shop/garage installations.

This 130W “High Bay LED Shop Light?is a ridiculously bright light LED light fixture.I was looking at it when I plugged in in the first time, and saw rows of spots for 20 minutes!The dimmer and motion options interested me, so I followed up on those before writing a review.The motion option is a mystery. Maybe it plugs into the plug in the face of the fixture. There is no mention of it in the instructions. The website didn't offer any clue either. There is no set of wires labelled "motion".My guess is it shares the dimmer wires, but with no part number or instructions I gave up on that.For the dimmer, search Amazon for "DC 0/1-10V Knob LED Dimmer". I attached a picture of what you need.For wiring, you can try attaching it to a 1/8 three wire stereo plug (gnd + tip), it fits in the socket under the front facing threaded cap, more or less. I tried it, it worked, but I didn't like that hanging out middle of the lamp at all.So, I snipped the wires and ran them out the TOP with the other wires for a permanent solution.This makes way more sense. (use a different hole and clamp than the 120v wires if you do this too)Hint: Instructions say purple and black for dimmer. Be careful.They ran same colors/different order of wires after the wire nuts to the socket, so that didn't work.Find the Black / Purple wires coming out of the LED power supply. They are also labelled "Dim+" and "12V+" Those are the correct Black/Purple wires for the dimmer. Connect those two wires to the wires on the dimmer, and that's it! It dims!In addition, when you use this dimmer switch, after rotating past low it CLICKS, and switches the light OFF too. VERY handy, now you have full control of the light with a low voltage switch.The power consumption is 141 watts, measured with a kill-a-watt type device.With the dimmer installed, full power range is 14 to 141 watts. No blinking, it behaves very well.Off via dimmer is 3 watts, like standby mode.This light is super bright, it lights up 1/2 my basement on full. With the dimmer, it's a very useful light!With a UL listing, it is also safe. I like it 😊

I intend to install this light to install in one bay of our garage. I work on projects in this part of the garage when the weather permits. The advertised 45,0000 Lumens of light output attracted me to this product.The size of this fixture is about a foot shorter than a 48" fluorescent fixture (only 35.5" long and about 9 3/4" wide). It weighs just under 12 lb. (5.35 kg).I connected the light to a flexible 120V male plug for testing purposes. When turned on, the light consumes 295W at 120V. This is very close to the advertised 300W. The fixture uses two linear arrays of newer, efficient surface mounted LEDs that provide up to 150 Lumens per Watt. While there are LEDs that provide even higher efficiency, these ones are almost 40% more efficient than LEDs manufactured just a few years ago. For my light the 295W consumption would produce over (295 x 150 =) 44,000 Lumens. In other words, this light is VERY BRIGHT. My smartphone camera does not capture the brightness well. Believe me, you need sunglasses when you turn this light on!The instructions for this light are very poor! Here are examples of some of the problems I found with them:1. In order to install this light properly, you need to remove the cover on the emitting side of the fixture. The instructions do not describe this, or how to do this (even though, it is fairly obvious).2. The instructions do not describe how to properly wire the fixture to power. The more experienced do-it-yourselfer may have no problem with this but others may create an electrical safety hazard when installing the light. If you are hanging the fixture using the provided steel wire assembly, you must use the correct type of wire connection to your switch control. I suggest hiring an electrician to ensure proper installation3. The Amazon listing indicates this light is dimmable. I tried using a dimmer rated for 600W inline with this light. The light flickers annoyingly at any setting less than 100%. The single page instructions has one illustration showing how to connect the light to a "special" dimmer control using two wires coming out of the LED driver in the fixture chassis. However there are two LED drivers (part number KHM-NISG150W43M-1150) used in this fixture (one for each of the two linear LED arrays). The instructions do not indicate how or whether it is possible to wire one dimmer control for the two lights. Also there are no instructions on how or where to purchase the dimmer control for the fixture.4. The Amazon description for the product indicates that it is possible to connect a PIR (passive infrared) sensor to enable turning on the light automatically, when there is a person moving in the area near the light. The instructions do not provide information about this part, how to connect it, or how to purchase it. I found that if you remove the cap at the center of the emitting side of the fixture, a female plug is reveal for connecting the PIR sensor.All of what I have written above sounds quite negative. If you buy this light for the PIR control or dimmable possibilities, you will be disappointed and annoyed. If, like me, you know how to wire these kind of lights safely, and are just interested in an efficient, very powerful light, you will be pleased. I reduced my rating by one star because of the terrible instructions.

This is a nice light... it's very large and it's got a huge array of LED lights. However, it seems to me a little overpriced for what it is; if you look around on Amazon you can find similarly bright lights for significantly less. Also, while I'm sure it would be good in a warehouse environment, if you're thinking of this for a small space, 45000LM would very much be overkill, blindingly so.Unless you're looking to set up a huge space, I would recommend going for something a little more reasonable in terms of both price and brightness.

This is actually a really awesome light!I was worried when ordering this that it may be too bright and my ceiling too low to use this, but I took a risk and am really glad I did! I have a very standard sized 2 car garage with 9' ceilings I'm using this in. previously there was a single fixture of 2 of the old florescent tube bulbs all the way at the back of the garage...not ideal! Since I wanted these to still be hooked up to the same light switch but I wanted to move them to the center of the garage, I decided to convert these from hardwired to plug-in, so I just added a 10' 3 prong power cord within the housing of the light which this is set up to do very easily. I then added a single bulb light fixture that has a built-in outlet where the old lights were. So I was able to still use the round fixture box in the ceiling without changing anything. So now I have a single bulb there and this light hanging from the middle of the garage with both hooked up to the same old existing light switch... perfect!I made the hanging cables as short as they go and crossed my fingers this wouldn't be blinding bright and overkill like the listing and most reviews made me think it might...but it's perfect!! Sure it's very bright, but that's what I wanted. My entire garage is now bathed in natural looking light. In fact if you aren't looking up at the light itself it looks like I added a giant skylight and the sun is shining in. I love it !Overall this is a well built and bright light in a nice compact package. For the price and how versatile this is, I think it's a fantastic buy.

I needed some new lighting for my carport, I have a fluorescent tube fixture in there now but because of the cold it takes some time to reach full brightness, and it consumes more wattage than LED. I was very interested in this high-bay LED fixture due to its brightness and compact size. I show in my video unboxing and testing out the light.When I first turned on this light I was shocked at how bright it is, I wasn't expecting it to be so bright, also the light from this lamp fills a room evenly with an excellent 5000K color spectrum. Do not turn this light on when testing on a bench, as it's extremely bright. This lamp comes with all the hardware to hang the lamp, it's intended to be hard-wired so no cord is included. This fixture can also be equipped with a motion sensor, there is a port on the face of the lamp that can be unthreaded and an optional sensor can be inserted. Also, the brightness of the lamp can be lowered with the appropriate dimmer. I plugged this fixture into my power station and it displayed a wattage consumption of 295 watts, no wonder this light is super bright.I ended up installing a three-prong 90c cord onto the fixture due to the fact there is no hard wiring inside my car shelter, I plug the lamp in when I need to light up the shelter. This fixture must be grounded because it's made of all metal. I installed the fixture using the wire cables, they hang off the carport tubing.This high bay LED fixture is well made and constructed of all metal, this lamp can be hardwired from the top and sides, there are four electrical knockouts on the top for daisy chaining and knockouts on the side for mounting flush against a ceiling, and the lamp has safety standards certifications, UL listed, and accurate wattage rating. This fixture is also dual voltage, it can be supplied with 120v or 240v AC.This High Bay fixture provides more than enough lighting and is well-designed, compact, and of good quality, it's exactly what I needed to light up my outdoor work/storage area. I'm very pleased and giving the G GJIA LED Linear High Bay Shop Light 5 Stars.

I recently purchased the LED Linear High Bay Shop Light and I couldn't be happier with my purchase. The installation process was a breeze, and within minutes, I had this amazing fixture up and running. The light it emits is incredibly bright, providing exceptional visibility in my shop. While the lens is flat and produces a more forward directional light compared to my old fluorescent lights, it still manages to spread evenly across the area, eliminating any dark spots. However, I must caution that the brightness can be intense, so it's important to have ample height in the area where you intend to hang it to avoid any discomfort to your eyes. Overall, this high bay LED shop light is a top-notch fixture that delivers outstanding lighting performance and has exceeded my expectations.

This light is great at my workbench. I already had one light in my barn but I needed something a little bit brighter by my workbench and this is perfect. If I pull my truck up close to the workbench I can easily work on it and see everything I need to without a flashlight. The setup was also very easy.

Perfect light for a shop, garage, warehouse. It's thin but wife and very bright. Nicely diffused light so no bright or dark spots. Does need to be wired in. Comes with cables to hang and adjust to your needs.

Had an old fluorescent bulb setup in my garage work area whose bulbs had long since quit working. Decided I would have it fixed this spring, and this is the light I chose. This thing puts out great, clean, white light. It may even be a little "too much" if there is such a thing..The pics shown are in my garage in literally pitch black except for the light itself. Really creates a great output.So far - really liking the light. I did not use the optional dimmer setup. I just wired in the 3 wires to my old plug and hooked it all back up. Easy install and a great product.Recommend!