G GJIA 60W 6,600LM LED Loading Dock Lighting Round Series, Single Bracket

I mounted the arm to my teardrop pallet rack upright using (2) National catalog model No. 2192BC square U bolts. That is 3/8 x 3" x 7" and fit perfectly around the upright and into the holes on the mounting plates.A few minor issues:The button on the light is a metal push button located on the back heatsink of the light. You have to hold the hot light to turn on and off. I do not like that you have to hold what is basically the heatsink of the light to be able to press the button. In addition, the light is mounted high so a remote inline switch would be preferred and I plan to implement that.The second issue is the gimble that holds the light is held on with a knob that allows you to swivel the gimble. There is one nylon washer included for this joint and no matter where you put it, rotating the lamp will untighten the knob holding it all together. I'm going to try adding a few additional washers, silicone lube and if that does not work I may end up locktighting the knobs.The whole arm is pretty stiff as it comes preassembled. I prefer it that way so it stays put but it does take some force to move it. You could put a drop of silicone on the washers or loosen the bolts a little.The good stuff:It is very stable and very bright.There are many ways that you can bolt it together if you want the joints to be able to flex perpendicular to the way the factory put it together.You could easily mount a second light on the mast.

I mounted the arm to my teardrop pallet rack upright using (2) National catalog model No. 2192BC square U bolts. That is 3/8 x 3" x 7" and fit perfectly around the upright and into the holes on the mounting plates.A few minor issues:The button on the light is a metal push button located on the back heatsink of the light. You have to hold the hot light to turn on and off. I do not like that you have to hold what is basically the heatsink of the light to be able to press the button. In addition, the light is mounted high so a remote inline switch would be preferred and I plan to implement that.The second issue is the gimble that holds the light is held on with a knob that allows you to swivel the gimble. There is one nylon washer included for this joint and no matter where you put it, rotating the lamp will untighten the knob holding it all together. I'm going to try adding a few additional washers, silicone lube and if that does not work I may end up locktighting the knobs.The whole arm is pretty stiff as it comes preassembled. I prefer it that way so it stays put but it does take some force to move it. You could put a drop of silicone on the washers or loosen the bolts a little.The good stuff:It is very stable and very bright.There are many ways that you can bolt it together if you want the joints to be able to flex perpendicular to the way the factory put it together.You could easily mount a second light on the mast.

Ordered this for my husband's shop. He is always looking for more light, especially when he has a car up on the lift. This is the perfect solution. He mounted it on the wall so he can push it out of his way. It extends out easily and the light itself can be positioned in any direction needed. The light is very bright and has a cage protecting the bulb. It's industrial quality and a great addition to any shop. Highly recommend.

Ordered this for my husband's shop. He is always looking for more light, especially when he has a car up on the lift. This is the perfect solution. He mounted it on the wall so he can push it out of his way. It extends out easily and the light itself can be positioned in any direction needed. The light is very bright and has a cage protecting the bulb. It's industrial quality and a great addition to any shop. Highly recommend.

We did not need the longer bracket. This arrangement suits our dock position.

Great lamp, bright and sturdy. See the brackets mounting holes - those are not 2x4 stud friendly. If you attach this to a wall on 2x4 studs, the holes are too wide apart for all to hit the stud. Either drill holes in the middle of bracket or use a bracketing piece between the wall and this unit. I did the latter.

Great lamp, bright and sturdy. See the brackets mounting holes - those are not 2x4 stud friendly. If you attach this to a wall on 2x4 studs, the holes are too wide apart for all to hit the stud. Either drill holes in the middle of bracket or use a bracketing piece between the wall and this unit. I did the latter.

Installed 10 of these in a clients loading docks, they liked them so much they want to replace 14 more. Unfortunately you guys don't have enough in stock. I'm not seeing a place to contact the seller?

Installed 10 of these in a clients loading docks, they liked them so much they want to replace 14 more. Unfortunately you guys don't have enough in stock. I'm not seeing a place to contact the seller?

I love how sturdy this set up is. Very solid material. Easy to install. Very bright light. Bright yellow so you can see it and not run into it when it isnt on. Very versatile. You can swing it and will stay. Great value.

I love how sturdy this set up is. Very solid material. Easy to install. Very bright light. Bright yellow so you can see it and not run into it when it isnt on. Very versatile. You can swing it and will stay. Great value.

Everything about this swing light is solid and quality. Good mounting hardware included. I got tired of positioning portable lights and flashlights when I have to work on the car and now with this mounted to the wall it is like daylight. Totally awesome. The best part is how it swings away to the wall when you don't need it. Love being able to position and point it where I need the light. This light will make your life easier.

Everything about this swing light is solid and quality. Good mounting hardware included. I got tired of positioning portable lights and flashlights when I have to work on the car and now with this mounted to the wall it is like daylight. Totally awesome. The best part is how it swings away to the wall when you don't need it. Love being able to position and point it where I need the light. This light will make your life easier.

Loading dock

Loading dock

Super sturdy light. Professional quality.

Super sturdy light. Professional quality.

Heavy metal, industrial is the word I'm looking for.It's super bright, plugs in with a normal plug. I installed it on the inside of our garage right at the end so I can extend it outside and it works so great.Extends and tilts so it can light up anything of any size. This the ng will not disappoint. I love it and recommend you get it if you are looking still.

Heavy metal, industrial is the word I'm looking for.It's super bright, plugs in with a normal plug. I installed it on the inside of our garage right at the end so I can extend it outside and it works so great.Extends and tilts so it can light up anything of any size. This the ng will not disappoint. I love it and recommend you get it if you are looking still.

We are using this light in our pole barn for our frequent night work. We have mounted this unit on the wall and it can swing out to bring the needed lighting to our work The swing arm is very well constructed and the light portion is very bright. This is one item that makes our night work much better. Well done-Great product.

We are using this light in our pole barn for our frequent night work. We have mounted this unit on the wall and it can swing out to bring the needed lighting to our work The swing arm is very well constructed and the light portion is very bright. This is one item that makes our night work much better. Well done-Great product.

This light works superbly in the work space of my shop. I do a lot of tinkering and personal mechanic work. I had no issues with installation. It's easy maneuverability and bright light has been extremely useful. It's heavy duty so I don't have to worry about it seeing a bit of rough use. So far, it's holding up well. Overall, this light is bright, rugged, and maneuverable which works great for my shop workspace.

This light works superbly in the work space of my shop. I do a lot of tinkering and personal mechanic work. I had no issues with installation. It's easy maneuverability and bright light has been extremely useful. It's heavy duty so I don't have to worry about it seeing a bit of rough use. So far, it's holding up well. Overall, this light is bright, rugged, and maneuverable which works great for my shop workspace.

I have a sort of temporary garage shed I work out from time to time and I needed a stronger, directable light. This did the trick and feels well made to boot. I love how sturdy and stable it feels attached to the wall even after loads of adjustments and moving around. Another nice feature is how flexible it is and easy to adjust. You have tons of angles and movement that are simple to unwind and lock in place.The best part of this is that is crazy bright! I hope to eventually setup my permanent garage but until then it is nice and bright in mine because of this arm.8/10 I would recommend it. I hope this review is helpful