Permanent Outdoor Lights Installation Tips and Troubleshooting Guide

Here are some G GJIA's permanent outdoor lights installation robust tips and fixes to overcome some common issues :

Installation Tips

1. Start from the Power Source
   Always begin installation near the power point and work outward. This minimizes cable slack and maintains continuity in the wiring.

2. Apply Adhesive and Secure with Screws
   The strips may come with strong adhesive pads; however, we also recommend using the provided screws and clips, especially if the strips will be exposed to wind, moisture, or high temperatures.

3. Avoid Sharp Bends
   Be sure to prevent sharp turns or routing the light strips along rough edges. Such conditions can damage the circuitry and lead to performance issues.

4. Maintain Symmetry
   Use a level to ensure both pucks are aligned horizontally. Irregular lines may become noticeable at night, compromising the professional appearance.

Troubleshooting Common Issues

1. LED Lights Not Turning On
   Check all connectors to ensure they are firmly connected and sealed with waterproof caps. Loose or misaligned pins may break the circuit.

2. Unable to Connect to Wi‑Fi
   Make sure you are using a 2.4 GHz network. Try resetting your router or moving it closer to the lights. If the signal is weak, consider using a Wi‑Fi extender.

3. Lights Won’t Connect to the App
   Ensure Bluetooth is enabled during the initial pairing process. If commands are slow to execute, try resetting the app or updating it to the latest version.

4. Adhesive Failure
   Clean the surface thoroughly with alcohol before applying adhesive. If the tape comes loose, replace the adhesive pads and use screws as additional reinforcement.

Following these tips should help keep your GGJIA Permanent Eave lights bright, connected, and securely mounted for years to come.